Author Archives: phancs

Expose your ignorance

Hello everyone and welcome back to another apprenticeship patterns blog post which is going to about expose your ignorance for CS 448. I think it’s an important pattern because I was in the same situation because I was uncomfortable with having the idea I didn’t know what I was doing and I didn’t want other people to think I don’t know what I do so I would stay quiet and try to guess what’s going on and it wasn’t working so well for me just like the article says. I now think it’s better to let people know what you are struggling on so that they can help you through your problems. When I first started my internship at an IT company, I first let everyone know that I didn’t know much or anything about IT, and everyone was very understandable and help me through it. I think if I would of stay quiet and act like I knew what I was doing it would of cause more harm than if I didn’t. I know that in ordered to learn more and grow, you must expose your weakness. I think this pattern does a good explaining that you should find your weakness and work on it and add more to the list as you go and don’t be a shame of it. I agree that you must show the process through your journey for the people that depend on you to know your stuff because if you don’t then you would show no promise. It’s also important to build a strong relationship with people as you are in your journey. All in all, I think this pattern was important because it highlights most of the stuff that should make you successful when on a journey to be a craftsman. I don’t disagree with anything in this article because most of the stuff that it goes, I try to follow every day because its good advice which I hear from successful people. I think it’s important to honest with your self and knows that you still learning and everyone doesn’t know everything and everyone is still learning

From the blog CS@Worcester – Phan's CS by phancs and used with permission of the author. All other rights reserved by the author.

Sprint-6

Hello everyone and welcome to another and last sprint retrospective blog post for CS 448. Today I’m going to talk about what went on during our last sprint which is sprint 6. First, what I work on was finishing up the presentation. The steps I took during my steps to finishing up the presentation is that I reverted to the old commit of my original Ampath template because my slides would be about the beginning phases of the project. I made demo clips of both the old left navigation bar and the new left navigation bar to show how it would function. I also created a slide on how to create a blank angular project. I wanted to show I took stuff from the previous class 348 and implement them in this class 448. I also made a slide for the HTML code and the CSS code and I’m planning to explain them during the presentation on Wednesday the 15th. Our group has been working hard to get the presentation finished and we decided that each of us would do 5 slides each. The 5 slides would be about which member work during this semester. I think that we are about done, and the project looks great. During this sprint we didn’t plan much because we were approaching the deadline, so we wanted to just focus our full attention on the polish version of our Ampath project. Mike is going to be presenting the dropdown box during the presentation day and Tim is going to talk about the conversion from GitLab to GitHub. Kat is going to go over the Angular imports and the features that she added. Yensia is going to go over the rest of the Ampath project that she was working on during this semester. All in all, I think I learned a lot during this semester because I felt like this was a good simulation of what a job would be like. I feel way more comfortable in scrum than before. I think the weekly meetings help get used to always working and making sure I stay involve and keep the members of my group updated. I believe that our group works great together and we got many kinds of stuff done during this semester. I think that the left navigation bar was exactly what Greg was asking for at the beginning of the semester. Also, I learned more about Angular while working with this Ampath project. I don’t think there should be any improvements as I thought that the semester went very smoothly, and everything works out. In conclusion, this is the last sprint and the end to a very successful semester and my group was great and I enjoy this experience.

From the blog CS@Worcester – Phan's CS by phancs and used with permission of the author. All other rights reserved by the author.

Sprint 5

Hello everyone and welcome back to another sprint blog post for CS 448. Today blog post is about what I did in Sprint 5. In sprint 5 I focus most of my time working on the presentation. I brain several ideas on what I was going to go over in the final presentation day. During this time, our team was working on a specific feature for the Ampath project. During the meetings we would discuss how we would improve the Application. We would help one another when needed and would advise each other on how to improve the in certain areas. During the project we came into a couple problems because in the beginning as I was creating the project I create it in Gitlab instead of GitHub so that a merging error which we eventually got the project to be converted, thanks to Tim who is a member of our group. I believe the merging and converting took a couple’s days, so we had to wait to push certain commits until the project conversion from Gitlab to GitHub. We are still working on merging our component to the group’s component because the problem that we came across was that the alignment wasn’t right. Also, during this sprint, we were looking into library type things in Angular. We also finished keeping an eye out for Zeplin shared folder – where designs will be. I would also like to say during this sprint we work well together as usual and everyone contribute equally. Mike was working on the drop-down box which he added many cool features. I also had many of the of the meetings on Tuesday and Friday done during this week’s sprint. All in all, I learned a lot from this week sprint 5 like that creating a project and GitLab and trying to paste it in GitHub creates major problems and time to fix. I also learned more about how Angular works by working on this Ampath project during this week. I am also improving on working as a group in scrum while working on this project during this week sprint 5. I think the plan for next week is to finish up on the presentation and have a working polished project to present. I believe that we will have those requirements by the end of the next sprint. To finish up this blog post I would like to go over the objectives for this week sprint 5. First, to get the presentation started and have a template of ideas. Second, we would also be close to finished with the application because we were approaching the end of the last sprint week. Finally, to learned more on Angular applications.

From the blog CS@Worcester – Phan's CS by phancs and used with permission of the author. All other rights reserved by the author.

Find Mentors

Hi everyone and welcome to another apprenticeship pattern blog post. Today apprenticeship blog post is going to about find mentors which I think is important because I’m doing the same thing in my new internship. I realize when you new to your craft or job it’s important because to always ask a question and help when needed and there should be someone you can count on. I agree with this pattern because when working and you come across a problem and have no idea how to fix it, you will need guidance and that will be your mentor. I think the best way to learn is to listen to those who have to be there before. I also agree that everyone will always find a mentor because I think there always someone that is willing to help anyone new that needs help. There might even be more than one mentors that will supervise an apprentice for example in the new job I have many people helping when I have trouble with a problem. I also agree that real-world apprentices have to scratch and claw their way into the lives of master craftsmen and are grateful for whatever attention they can get because I think that some mentors don’t if you want to learn or not so I think it always best to ask question and try to shadow the mentors as much as possible. I agree that when finding a mentor, you shouldn’t expect the mentor to know everything because no one does, and you are still walking the long road too. I like how the actions give a good tip on finding a mentor because it’s important to find the right one especially one the is patient with you. All in all, I think this apprenticeship pattern find a mentor is helpful and important. I know when I first started my job, I was looking for a mentor to help me when needed and I lucky to have a few that is patients with me. I feel like it was really important because I don’t think I can progress fast without taking the knowledge of others.

From the blog CS@Worcester – Phan's CS by phancs and used with permission of the author. All other rights reserved by the author.

Sprint 4

Hi everyone and welcome back to another sprint retrospective blog post. This will be the fourth sprint retrospective blog post of this semester. During this sprint number 4, we had many objectives completed. We added some new features like the hyperlinks to the database so that when the tab has been clicked it would navigate to the new link. We reformat the whole prototype so it would look more cleaner and more better-looking product. We decided on what device we were going to scale the application to which was an iPad mini. The scale will only look exact on that certain device and not any other because we haven’t made that a priority. We are just waiting to have a working finished prototype before thinking ahead and making the applications more universal. The styling was easy, once we decided the font, color, etc. Every meeting we had went smoothly as we discuss the future of our component. There some of the stuff that we are still working on like moving the Trello issues to GitHub and investigate the library type things in Angular. So far have been using a device simulator to test the applications as it is the closest thing, we can to think of to test it. We did more research on mobile angular documentation so we can benefit from the perks that mobile angular has to offer. We added a couple of new stories to our sprint backlog. First, as a developer working on ng2-amrs I need to learn about testing in Angular so I can write tests for our new code. Also, as a developer working on ng2-amrs I need to watch the provided YouTube tutorials on the #ampathoffcial Slack channel, to get a better idea about what kind of web applications we’re building. I also started working on the PowerPoint for our presentation because we are almost coming to the end and finishing our application. We also finished some of doing task which we move to done column like for example we moved keep an eye out for Zeplin shared folder – where designs will be to done folder and sign up for zeplin – send info to bio Greg – verify email. There is some other task that we are also working on the side like figuring out the mocking database, duplicating amrs service – possibly using json file to store data. All in all, we are almost finish with the ampath left navigation bar application. Everyone in the group so far has done a good job contributing to the project. We doing a good job coming up with new feature to add to the project every meeting we have. We can very familiar with the method of scrum now and see why it is a great system when working with a group because it keeps everything organize so things will move smoother. I also like to mention that I like where we are at in the project and happy with how the product has turn out so far.

From the blog CS@Worcester – Phan's CS by phancs and used with permission of the author. All other rights reserved by the author.

sweep the floor

Hello everyone and welcome back to another apprenticeship pattern blog post. Today blog post is “sweep the floor” which Is basically about what happens usually you’re a newcomer. The task will be simpler than you expect but as the more you learn the more skill you become and eventually you will start to have more complex tasks. I learned that when you are in a team and you don’t know your place on the team and the team is unsure of you, you should try to find some way to contribute so you can earn some trust from the new team. I agree with this completely because when I start with a new team I always try to contribute as much as possible, so I don’t feel like I’m not contributing. I learned from experience that it’s best to contribute early as possible because you don’t want to give a wrong impression even if you don’t mean it. The more you put in to the project the more people will respect you because if you don’t put in any effort, they will all think that you shouldn’t be on the team and you don’t know what you are doing. I learned that its’s really important to volunteer for any task even if the task is not unglamorous but necessary tasks. I agree that it show you can do any job and gives you a chance to display your work. I learned that I should tackle the grungiest task that everyone is putting off because it will show people that you know what you are doing and it’s a way to exceeds people’s expectations. Always try to make the task more creative so that it can be more fun to work on. All in all, I think this individual apprenticeship pattern sweep the floor is really important pattern to learn because it teaches you how to function when working within a new group. I took a lot from this pattern and agree with every information that it gives. I have implemented most these tips in my daily life and benefit from them.

From the blog CS@Worcester – Phan's CS by phancs and used with permission of the author. All other rights reserved by the author.

Sprint 3

Hello everybody and welcome to another sprint retrospective blog post. Today sprint retrospective blog post about what I have done during sprint 3. Some of the things we had on our sprint backlog is if we have login information – examine screen code for some examples of screens on AMPATH site. Figure out if we’re getting information to access AMPATH site. If we have time – read more about Angular unit testing – mocking. If we have time – read more about Angular unit testing – mocking. Read mobile angular docs http://mobileangularui.com/docs/. I also sign up for Zeplin and send my information to Greg so he can verify my email. I also kept an eye out for Zeplin shared folder – where designs will be. I also to work on the navigation bar tool for the Ampath project. I created a skeleton for the Ampath project and discuss roles for stories that will about the project. After the second sprint I realize that I was getting more comfortable with scrum. I can now easily now login on to Trello and understand what’s going on and what I can do and what other did and are in the progress of doing. When I finished the skeleton, I posted on Gitlab instead of Github because there wasn’t a repository for at the moment and I was more comfortable with Gitlab. I also lookup more sample of a navigation bar so I can see what features other navigation contains. One of the problems that I have so far was to get the toggle button to drop down when click because the code actually to drop down when hover. I think the scaling of the project is not going to be a problem because I tested the component and it look fine in a iPhone simulator. There were others stuff I think has to be done like adding information and hyper link to the navigation tabs so that when clicked it would navigate to a different view controller. I think design is also important later to make the component more presentable. I also ran the project on a web browser, and it was fine too. During the standup, I got more comfortable with the time schedule. I haven’t missed a stand up. I realize the importance of the standup so that we can keep track on our progress. All in all, I think this sprint all went very well, we got a lot done, I think. I also found many ideas on how to show that link actually works by inserting hyperlinks and navigate to that site. I think it is a good way to show how the component performs. I didn’t have much problem during this sprint and expecting the same going forward. The only problem is that we don’t have access to the service right, but I don’t think its issue because we don’t really need it to have the component to work. This sprint was fun, and everyone was on the same page, until the next sprint retrospective blog

From the blog CS@Worcester – Phan's CS by phancs and used with permission of the author. All other rights reserved by the author.

nurtured your passion

Hello everybody and welcome to another CS 448 apprenticeship patterns blog post. After coming back from spring break which was a relaxing week, the pattern that I will be discussing today is nurtured your passion. This blog covers how to protect your passion for software craftsmanship. I agree with this article when it goes over that the environment can disrupt your passion for software craftsmanship. This article gives good advice on how to keep your focus on becoming software craftsmanship like finding something at work that interests me and that I can enjoy. Also, it’s important to find the time to work on a project that is more enjoyable. I agree on this because during the beginning stage of my programming journey I would work on learning the fundamentals of programming and problem solving which was not really enjoyable and at times I felt like quitting but when I eventually move to the more advanced classes I found that I was working on more application based projects so that made me more passion to learn more but if I was just working on the fundamental stuff than I would probably quit programming because it wasn’t as enjoyable like creating applications. One of the other tips that it gives is studied the classics which was to learn the fundamentals which I understand is important, but I figure it’s better for me to learn the classics and work on the enjoyable project at the same time. I like that tip that you should find an environment that is comfortable to work in because certain stuff can bother you like co-employees, the rate of pay etc. and this can affect your passion for software craftsmanship. All in all, I think this pattern is helpful like all the rest but there were some things I didn’t think we have control of sometimes because yes, we could also leave an annoying situation but many jobs I know from experience always has its flaws but finding a job that provides more enjoyable work it more reasonable. I think this pattern is great and it inspires me to be more in control of my journey.

From the blog CS@Worcester – Phan's CS by phancs and used with permission of the author. All other rights reserved by the author.

Learn the basic

Hi everyone and welcome to another CS 448 blog. Today blog is going about study the classics which is one of the apprenticeship patterns by Adewale Oshineye, Dave Hoover. This blog is a simple pattern which helps me understand the importance of learning the basic. This pattern is about constantly updating your knowledge about the field and making sure you have a strong foundation on the field. After reading this apprenticeship patterns I realize that I should ask where the sources of information are coming from when trying to understand a subject from a person. Most of the time when I don’t understand something that is being talked about, I usually just ask the individual to explain the details in more depth but now I understand I should ask the person where they had discovered the information so I can learn it. I think the biggest problem I have with advancing my skills in programming is that I don’t read enough. After reading this pattern I decided I going to make a reading list to further my knowledge in programming. I like how the pattern points out that there a reason why the classic books are kept and are important to learn. This change the way I judge classic textbooks and now I more interested in them. Most of my books are updated so I haven’t look at any old books yet but I disagree with this pattern a little because some of the books like programming books always have to be updated so the classics wouldn’t apply but I can see other books like theory having classic book that can still relate even in today times. All in all, I think this apprenticeship pattern study the classics is important to the pattern because it explains the importance of understanding the classics while using modern tools. After reading this article I learn to read more, and I change my view on reading. I always feel like watching videos and doing projects was enough, but I now realize that you have read more of both classics and modern book to further my knowledge in the programming field.

From the blog CS@Worcester – Phan's CS by phancs and used with permission of the author. All other rights reserved by the author.

Sprint Retrospective Blog Posts 2

Welcome back everyone to another CS 448 blog post. Today topic is going to be about the second sprint retrospective. This second blog post is going to about the recent actions that I been learning in the class, the work and work products that I am producing during the second sprint. The second sprint was very informative we worked on researching many topics that can potentially relate to our projected plan like Angular testing, Ampath, etc. During this sprint, I already had the Ampath to run on the personal computer but there were a few group members that were having minor issues when building the Ampath project, so I prioritize some so my time towards having Ampath running on every member in the group personal computer. I research many of Unit testing for Angulars like Karma and Protractor and found it important to learn for a solid foundation when testing in Angular. There was really much work again during this sprint as we were waiting for more information about objective for the Ampath project but meeting on this sprint we finally got some clarity in the project. We added more task in our sprint backlog like figuring if we will get access to Ampath on our computers, keeping an eye out for Zeplin shared folder and finding out more about mocking the database. There were also some videos from Gregory Schmidt that we had to watch which I finish which gives the main idea on which we should create during this semester. I found these videos easy to understand and after I feel more anxious and clearer on what must be done. I saw that Gregory Schmidt was developing an android application and now curious if we can create the Ampath application in another platform like IOS. My thoughts on the project are that the project will be a simple application that records and stores data. I will be continuing to do more research on this project during the break and found out more about the developing environment and programming language that we will be using. I researched briefly on how to save data into a database and I found that in IOS developing you can use SQL to create a database and then import the database into the swift project. I believe that you can probably apply the same concept with another other environment and programming language. Other than this information, I really haven’t done any significant towards the Ampath project. Also, if anyone is still having trouble getting the Ampath project to run on their personal computer just follow the lists of steps that I and the members of my group posted on slack. During the sprint, our group work well and perform great together as a team. I learned a lot of important information about testing and application development during this step. I am planning on applying some the stuff that learning in application developing in Swift towards the Ampath project. All in all, this is what happen and the things I learned during this sprint.

From the blog CS@Worcester – Phan's CS by phancs and used with permission of the author. All other rights reserved by the author.