B5: Encapsulation

Encapsulation

        I chose a podcast this week to try and broaden my learning experience using different resources. This podcast talked about object oriented programming dealing specifically with the idea of encapsulation. It went through the basics of what encapsulation is and how classes, methods, and variables all connect with each other to hide data. The people on the podcast explained the differences that encapsulation can have between different languages but the basic idea is essentially the same. The overall syntax may change slightly but the idea of data and code being hidden from the user is still there. They then explain how the idea of a roadmap works well with this idea and how helpful it could be if other programmers are looking at the code. It allows programmers to understand what they can and should use in your code. They go over access modifies such as public, private, and protected where they explain that giving the user all the code can be harmful as that allows the user to change values that could end up breaking the program. They also use global variables to help show this point by saying they are not reusable and make it more difficult to track down errors.

         I chose this podcast because encapsulation is an essential part of coding in an object-oriented language like java. It allows the programmer to hide code that doesn’t need to be seen by the user to make sure that they can’t alter anything they shouldn’t. I have to admit that out of all the complicated podcasts I searched through, this one especially made it easy to understand java concepts. Coding blocks has a solid source of information and does a great job explaining how everything works using their own definitions for the somewhat confusing vocabulary. Although I already knew most of this information, it was a great idea to refresh on it because I had forgot all the vocab such as mutators and accessor methods which I just called getters and setters. Overall the content was very easy to understand due to the helpful explanations given by the people in the podcast. It affected and helped me by allowing me to refresh on encapsulation and encouraged me to go look at inheritance along with polymorphism again. This obviously will tie back to our class since we’re going to be using a lot of object oriented programming in java and using encapsulation to work on our projects. Encapsulation will have a big impact on my practice of code as it will help shape my design for how the code will look and what the user will have access to if I want them to only have limited control over the program.

From the blog CS@Worcester – Student To Scholar by kumarcomputerscience and used with permission of the author. All other rights reserved by the author.

Design Patterns: Favorites

URL:https://www.codingblocks.net/podcast/design-patterns-iterators-observers-and-chains-oh-my/
I know it may be a little redundant, but again like the past two weeks, my blogpost for this week will be about Design Patterns, but it will part three of four of the Coding Blocks Design Patterns Saga. This time though, the podcast did not focus on a specific kind of Design Pattern, but instead their favorites. In this week’s blog I will be explaining what was discussed on the podcast in detail, examples that go along with it and what I had learned from it. The three Design Patterns summarized today are Observer Pattern, Chain of Responsibility, and Iterators.     So, Observer Patterns maintains its dependences by notifying them of events by calling a method on the dependent. So in a nutshell when an object, which is called a subject in this case, maintains a list of its dependents and notifies them automatically of any state changes usually by calling one of their methods. The downside of this is that it can cause memory leaks. The class that is adding these response headers to this element has got a strong hold of these objects. If they are never disposed of or the garbage collector never gets them properly, all these objects just stay alive and never get taken away. An example is a notification example on your phone. It doesn’t care what someone else’s phone does with notifications. Notifications are sent from the server to my phone that I am subscribed to and I am notified of events in some way. I don’t care what happens on other people’s phones, but I respond in a certain. Visualize a pubsub environment, each responder of each element can happen independently from the other and it doesn’t matter how they respond. The other downside is the abstraction layer hopping. It is pretty much when the layers in between are ignored and shortcutting the system.      The second Design Pattern was Chain of responsibilities and there is no strong use case. So to start off with an example, you are part of a large company. THis company had a purchasing request. If the request was under $50, it is approved. If it is greater than $50 but under $250 the manager has to sign it off. If it is greater than $250 but under $500 the accountant takes care of it and if it is under $5000 but greater than $500 the CEO decides. So while this is a bad example of inheritance, you inherit from manager, manager inherits from accountant, and accountant inherits from CEO, so it is still inheritance. So you say if it’s greater than 50, pass to next part, and greater than 250, pass it up until you get to the designated area. What I thought was really interesting though, was when they mentioned a real world example which is exception handling.      The last one mentioned today was Iterators, which I had heard of before this. Iterators are a pattern in which the iterator is used to traverse a container and access the container’s elements but the pattern decouples the algorithms from the container. So algorithms are container specific and cannot be decoupled. It provides a way to access the elements of an aggregate object sequentially without exposing its underlying representation and not exposing what that data is. A good example is the fibonacci sequence, since it technically does not have to do with any lists or arrays. When you want to sequentially traverse whatever that collection might be and you want to decouple that traversal algorithm away from the container, you don’t want the user to know how you’re containing that data. You still want the user to be allowed to traverse through the data. The consequence of this is that sequentially has to keep track of its location, and can have two loops accessing the same iterator.      The last thing mentioned in the podcast as usual was its resources which as always I love. It just gives me more resources that I cn had to my little library and will help me a lot in the future. Now honestly, this podcast was not as interesting as the first two for me. With the first two, I was learning about them in class, so it was cool to compare and contrast was was said on the podcast to what I was learning in my class. With these three Design Patterns, I hadn’t ever really hear of them, except iterators, and they just were a little hard to completely understand without a visual representation. I think like the other two though, knowing these Design Patterns in general will help me with my future coding and that is what is more important. 

From the blog mrogers4836 by mrogers4836 and used with permission of the author. All other rights reserved by the author.

Lesser–Known Java Syntaxes

https://blog.joegreen.pl/lesser-known-java-syntaxes.html

Today I stumbled across an interesting little blog post on lesser-known Java syntax. The author gives examples of code that doesn’t look like it would compile, but is surprisingly still legal syntax. For example, a two-dimensional array is usually declared like this:

int[][] arrayOfIntArrays;

However, since the brackets can be placed after either the type or identifier when declaring a regular array:

int[] intArray;
int intArray[];

A two-dimensional array can also be declared like this:

int[] arrayOfIntArrays[];

An interesting (although hard to read) application of this is that a single and multidimensional array can be declared on the same line:

int[] intArray, arrayOfIntArrays[];

This line of code declares an array intArray and a two-dimensional array arrayOfIntArrays. The second one is two-dimensional because the brackets are placed after both the type and identifier just like the previous example. The fact that another array is declared on the same line does not change anything. Although it is not very practical, it is still a very interesting use of syntax that compiles just fine. Similar syntax can be used when specifying the return type of a method. A method that returns a two-dimensional array would usually look like this:

int[][] fun();

But since brackets can be added to the end of the method signature, it can also look like this:

int[] fun()[];

Taking all of this to the extreme, a method that takes an array of arrays as a parameter and returns an array of arrays can be written like this:

int[] fun(int[] arrayOfIntArrays[])[];

Next the blog discusses the receiver parameter, which is a syntactic device for an instance method or inner class’s constructor.

class MyClass {
    public void method(MyClass this, int argument) {
    }
}

This code compiles and generates the same bytecode without MyClass this as a parameter. Currently the only use of this syntax is to annotate the argument.

The most commonly taught way to initialize an array is like this:

int[] intArray = new int[]{1, 2, 3}; 

However, the type of the array does not have to be specified twice. Instead, an array can be declared like this:

int[] intArray = {1, 2, 3};

But splitting this line of code into two lines will not compile. If the array is declared without being initialized, the new int[] must be included when the array is initialized.

I selected this blog post because I think it is very interesting and useful to see examples of code that don’t look like they should compile, but they do because there is nothing wrong with the syntax. It’s important for a software developer to know the ins and outs of the language they are developing in and knowing little quirks like this helps give a better overall understanding of the language. The more syntax you know the less caught off guard you will be when reading other people’s code, as nobody uses the exact same syntax in every situation.

I learned specific syntax from this blog that I will now understand if I ever see. These examples helped me better understand Java syntax in general, which will make it easier to read other people’s code and will make me less prone to errors.

 

From the blog CS@Worcester – Computer Science Blog by rydercsblog and used with permission of the author. All other rights reserved by the author.

Quality Assurance – The Most Important Aspect of Testing

A big part of testing is making sure that the product you are working on is going to be a highly reliable, quality piece of software. Quality assurance is a big part of testing as a poorly designed product could mean bad news later on down the line. Softwaretestinghelp.com recently posted a blog that dives into this subject.

The first thing that stood out to me in the blog was a formula: Quality assurance = quality control + defect prevention. This formal makes a lot of sense to be. One of the main goals of testing is making sure it works as it should and if it doesn’t making sure someone knows it needs to be fixed. That is the quality control portion of the equation. The second part, defect prevention, is preventing bugs from getting into the software in the first place or recognizing a problem before it happens. I feel if you complete testing with confidence that those two items have been completed, you have done your job as a tester.

Now, how might one go about making sure they hit the mark with the formula? First of all, reviews are a very important aspect. This includes design reviews, specification reviews, code reviews, etc. I cannot express the importance of reviews. Getting other sets of eyes on things are crucial to making sure nothing is missed. From my experience at work, reviews are done for anything and everything, and if a review isn’t done it usually sent out with a disclaimer that whatever is being sent out is a draft. It will bite you if you don’t. Another important step to meeting the requirements of the formula is logging any issues that may have been find when testing. Any issue, not matter how small, should be logged and investigated to determine the problem and if any action is needed. This relates to the next item of the list, which is finding the root of the problem. Often a bunch of little issues that have to keep being fended off are really due to some underlying issue. It is important to make sure that you find the real issue, and not just cover it up. Lastly, make sure as a tester you utilize the resources you have available to you, especially your manager. They have the ability to get you what you need and probably know that quickest way to get it. Most of the time they are more than willing to help as your work reflects on them as well.

This blog provided a nice intro into testing with quality assurance in mind.  I found their thoughts to be intriguing and will be on the lookout for more blogs like this one considering how important quality assurance is to a piece of software.

Link:

http://www.softwaretestinghelp.com/defect-prevention-methods/

From the blog CS@Worcester – README by Matthew Foley and used with permission of the author. All other rights reserved by the author.

What is Smelly Code and Why Your Code May be Stinking Up the Room

Code Smells. Kind of a strange phrase, isn’t it? At least I thought so while perusing Professor Wurst’s concept diagram. I decided to look it up out of curiosity and found some interesting information on it.

Well, what exactly does it mean? In short, code smells is basically code, trends, patterns, etc. that indicate there may a be an underlying issue with the code that could cause issues later down the line and/or is already causing problems. Now, that doesn’t mean the “smelly” code will always cause problems. It could be there for a specific reason. Perhaps it has to handle an odd scenario or something similar, but the point of knowing what smelly code is to be able to determine where there my be common issues or bad habits. In his blog at codinghorror.com, Jeff Atwood dives into some signs of stinky code…

Going through his list, there are several that stuck out to me. The first couple involve length. Long methods are trouble for several reasons, but perhaps the most important is they can be hard to read and trouble shoot. Atwood mentions that methods that are significantly longer that the rest of the methods in the class/program are often trouble and it is a good idea to break it into smaller methods if possible. He also mentions lengthy parameter lists. The more parameters, the longer and more complex the method is going to be. I have to say I agree with both of these. Nothing is worse than trying to read through an endless block of code. Items can get lost and users can easily get confused or lost while trying to decrypt what is going on.

Next on the list are “oddball solutions”. If there is a problem that needs to be solved multiple times, there should only be one way of getting to that solution within the code. There may be multiple ways to get to an answer (i.e. 5*1 = 5 and 1*5 = 5), but the way of getting to the answer should be consistent throughout your code. I agree with his thoughts here. Seeing two different equations to get to one solution could certainly confuse the reader. Not to mention that if the process is the same it should probably just be put into a method anyhow.

Last on the list this week are temporary fields. Make sure that all the fields are actually needed. Unnecessary fields can cause, you guessed it, confusion. The user may think they are needed for some reason and may deem the program to not work properly or something similar. Not to mention that fields that need to be filled out each time the program is run can be extremely annoying while trying to test, so you are doing yourself a favor by keeping the number of fields down as well.

Since I have found this blog particularly useful and insightful, I plan to continue with a part two next week, so stay tuned.

Link:

https://blog.codinghorror.com/code-smells/

 

From the blog CS@Worcester – README by Matthew Foley and used with permission of the author. All other rights reserved by the author.

Ethical Hacking

Source: https://www.computersciencezone.org/what-is-ethical-hacking/

This week I found a blog called computer science zone. There was this one blog that caught my eye which was called What is Ethical Hacking? Ethical hackers sound like an oxymoron because when you think of hacking you think of people who break into people’s computers, small business accounts, and websites. Where they would go on and steal personal information such as bank accounts, addresses, social, and many other things. The people that I was just talking about fall into the category of black hat hackers. However, there are hackers that are not all about stealing information their people are called white hat hackers. These people are actually hired to hack into company’s websites to find security leaks or holes so that way they can take care of it before someone who is trying to do serious damage can find it. There are a few specialists that this blog talks about as well such as information security analyst, security engineer, and penetration tester. As an information security analyst, they are responsible for solving security problems are companies and origination with substantial technology and informational infrastructure. Because of this there are a team of it professionals that monitor the database for these companies and they even ward off cyber-attacks daily. With security engineer, they are responsible for beefing up the security that they have and even creating new and effective ways to make the security for the company even stronger. With penetration tester, they are responsible for maintaining secure connect ability between internal and external communications. This means that they are often between email servers and accounting and communication software and the internet to keep hackers from invading those firewalls.

I like this blog a lot because it talks about a few future jobs that we have available to us as computer science majors. They even give the amount of money you make what you do at the work place and where they are usually at. This blog is very cool to read because when I was taking data security we learned about white and black hat hackers and I was very into that topic that it was really cool to see that there are different types of hackers in the work and not all of them are out in the world trying to do evil. So, it is nice to see that with computer science we are able to do many different jobs with many different people from small business and even muli-billion dollar companies.

From the blog CS@Worcester – The Road of CS by Henry_Tang_blog and used with permission of the author. All other rights reserved by the author.

Ethical Hacking

Source: https://www.computersciencezone.org/what-is-ethical-hacking/

This week I found a blog called computer science zone. There was this one blog that caught my eye which was called What is Ethical Hacking? Ethical hackers sound like an oxymoron because when you think of hacking you think of people who break into people’s computers, small business accounts, and websites. Where they would go on and steal personal information such as bank accounts, addresses, social, and many other things. The people that I was just talking about fall into the category of black hat hackers. However, there are hackers that are not all about stealing information their people are called white hat hackers. These people are actually hired to hack into company’s websites to find security leaks or holes so that way they can take care of it before someone who is trying to do serious damage can find it. There are a few specialists that this blog talks about as well such as information security analyst, security engineer, and penetration tester. As an information security analyst, they are responsible for solving security problems are companies and origination with substantial technology and informational infrastructure. Because of this there are a team of it professionals that monitor the database for these companies and they even ward off cyber-attacks daily. With security engineer, they are responsible for beefing up the security that they have and even creating new and effective ways to make the security for the company even stronger. With penetration tester, they are responsible for maintaining secure connect ability between internal and external communications. This means that they are often between email servers and accounting and communication software and the internet to keep hackers from invading those firewalls.

I like this blog a lot because it talks about a few future jobs that we have available to us as computer science majors. They even give the amount of money you make what you do at the work place and where they are usually at. This blog is very cool to read because when I was taking data security we learned about white and black hat hackers and I was very into that topic that it was really cool to see that there are different types of hackers in the work and not all of them are out in the world trying to do evil. So, it is nice to see that with computer science we are able to do many different jobs with many different people from small business and even muli-billion dollar companies.

From the blog CS@Worcester – The Road of CS by Henry_Tang_blog and used with permission of the author. All other rights reserved by the author.

CS@Worcester – Fun in Function 2017-10-09 23:59:28

The blog post this is written about can be found here.

This blog post by a software engineer working at Facebook outlines several anti-patterns, including examples, why they’re bad, how to avoid them, and why it’s difficult to avoid them. I chose it to read because of the obvious connection to the course material, my continuing desire to avoid bad practices, and the fascinating connections the blogger makes to the cognitive biases that explain why we fall into these traps.

Some of the anti-patterns are time-wasters, like bikeshedding and analysis paralysis. Bikeshedding is described as the tendency to spend a disproportionate amount of time debating unimportant details. The blogger suggests flipping a coin or voting when you notice this problem arising. You can resolve to revisit the decision at a time when it’s more relevant, as long as you get the decision over with quickly and move onto more important ones.

Analysis paralysis is analyzing so much that it impedes progress. The blogger suggests that this anti-pattern crops up due to information bias and validity bias. Information bias is defined as the belief that you can make better decisions the more information you have, regardless of whether the information is relevant to the decision. Validity bias is overestimating how accurately you can predict an outcome based on a set of information, even if that information is unreliable or outdated. These can lead us to the belief that more analysis will be useful, even when it won’t. His solution to this anti-pattern is more iterations of code. If you go ahead and try something, you can see actual outcomes and modify your code accordingly, instead of endlessly speculating about outcomes.

I also took note of several class-related anti-patterns. These include the god class, a class that knows about and/or controls too many classes; fear of adding classes, the avoidance of adding classes due to a misconception that they will make designs more complicated; and the poltergeist class, a useless class that ought to be eliminated. The solutions for the first two seem to contradict the solution to the last one, but taking all three into account leads to a clear picture of how to properly use classes.

For the fear of adding classes, the blogger gives a useful example of a tangled ball of yarn to represent too few classes. Adding classes can instinctively feel like adding complexity, but simplifying your design with additional classes is akin to separating the yarn into individual strands. Similarly, the god class can be broken up according to the single-responsibility principle, giving classes only one clearly-defined responsibility. Poltergeist classes lack a clear responsibility; they often only call other classes or add a layer of abstraction that isn’t actually necessary. When you create a new class, you should make sure it actually has a valuable role and simplifies the design.

Hopefully, having read this, I will be able to recognize these anti-patterns in the future and apply their relevant solutions.

From the blog CS@Worcester – Fun in Function by funinfunction and used with permission of the author. All other rights reserved by the author.

HashMaps

 

Today I read an article on coding-geek.com about HashMaps. I have used HashMaps before in Data Structures as well as Unix systems and have found them to be a very resourceful way to store and retrieve data. Most developers know about HashMaps but don’t completely understand how they work, in todays blog we will be cover HashMaps in JAVA.

HashMaps have an inner class called an Entry Class which holds the key, values and will return a value at the end. Two important main methods in the class are put() and get(). put() associates the specified value with the specified key in the map, it checks if the key given is null or not. If the given key is null, it will be stored in the zero position. The next internal part of the put method is that it fits the values inside of the limits of the array. The get() method is very similar to the put method but instead of storing, it returns a value. Get() gets the hashcode of the main object and finds the location of it in the array. If the right value is discovered, then it returns the value but if it cannot find it then it returns null. Put() and get() are two major internal parts of HashMaps and looking back at some of my old projects with HashMaps I now fully understand what is going on internally when I execute the program. I will use HashMaps more frequently in my projects now and I hope that after reading this you will be able to understand HashMaps better and will be able to give them a shot.

Source: http://coding-geek.com/how-does-a-hashmap-work-in-java/

From the blog CS@Worcester – Dcanton Blog by dcantonblog and used with permission of the author. All other rights reserved by the author.

Clean Code Principles

In this blog post, Marcus Biel gives his thoughts on clean code, what that is, how to implement, estimate, and accurately design good software that does exactly what it should and nothing more. What is clean code? The author writes,

“It’s the idea that your code should be precise and as close to perfect as possible. If you have more code than you need, it shouldn’t be there.”

This concept relates to YAGNI (you ain’t gunna need it), and is an essential part of having clean and readable code. Adding features that might be needed later is a good way to bloat your code and run into bugs. Clean code requires time to fully understand the problem, this is sometimes tough when working in an environment where you are being pushed by those who don’t understand what goes into software design. Sometimes you will be asked to meet deadlines that will make you rush, in turn you can end up with poorly written code. The language and wording in code is also very important, using variables and names that are clear and make sense help others read and understand what is going on in your code. I selected this resource because having clean code is a huge part of being a good programmer, along with tips on clean code, the author has tips on designing code by running tests first, working with co-workers and clients to understand what features are most important, and what features are not beneficial.

“To me, being a software craftsman is about having a focused attitude and about taking responsibility for your code, your job, and your time. So, from beginning discussions to end results, your one focus should be on maintaining your own high standards and creating the best possible product for your client.” – Marcus Biel

This post had a good amount of information and insight on clean code, and being a good developer in general. Important aspects from the post I think are being clear when naming variables, methods, and classes, leaving out code that is not needed (YAGNI), and making accurate timelines for projects. Rushing to write code before you fully understand the problem can lead to more problems down the road. I expect to use concepts of clean code in my professional career, I believe it’s very important to make a good product that will benefit you, your company, or your client.

The post Clean Code Principles appeared first on code friendly.

From the blog CS@Worcester – code friendly by erik and used with permission of the author. All other rights reserved by the author.