Week 10: “Is 30 too old to start a career as a developer?”

For week 10, I picked to read a Quora blog answering the question, “is 30 years old was too last to start a career as a developer?”.  Reading through all of the responses gave me a good indication of both what a bunch of engineers thought about this question, and also what I thought.  The majority of the responses said that it is never to late to learn something knew.  There was one response in particular where a grad student at Stanford talked about challenges regarding starting a career so late.  These challenges included difficulty in interviews.  He said that if you decide to all of sudden change your career, you will have to be prepared to answer those type of questions in interviews.  Also, you might have to face being the “old guy” amongst a bunch of young kids right out of school.  You not only would be older then them, but also you may not be as educated and experienced on the things you are doing.  Many college students have had many years of internships and stuff.  Age discrimination can be a challenge in the workplace, but that doesn’t mean it’s too late.

I personally believe that it is by no means too late to start an engineering career at 30, or any career at that.  To be a developer/tester you only need 4 years of schooling. Although of course it will be more difficult at times to catch up to everyone else, that doesn’t mean it’s not possible.  You can do anything if you are willing to put in the time and effort to do so.  You only have one life so why not do everything you can and always wanted to?  Most people in the workplace are very excepting of everyone, and they wouldn’t judge you because you are “too old”.

From the blog CS@Worcester – Alex's Comp Sci Blog by alexsblog13 and used with permission of the author. All other rights reserved by the author.

Week 9: “5 Excuses Every Software Tester Must Stop Giving”

This week I read a blog on excuses that testers must stop giving.  The first excuse they said that testers give was that they only have read-only permissions, and can only look at the logs.  Testers tend to blame why they can’t figure something out because they don’t have access to it, only the developers do.  The second excuse they give is that they “don’t deploy a build, some other team does it for us”.  The author, Mahesh C., basically was saying that testers need to learn how to do this type of stuff on their own.  If a tester can’t deploy a build because they don’t know how, and all of the developers are busy, the the solution is to learn how.  Testers can learn a lot form something as simple as creating a new build of the product, and seeing why and how it failed for themselves.  The third excuse that blog talked about was that testers say that they don’t debug an issue, they only log it.  However, the author is arguing the point that many of the times the logs will say it all.  A log can pinpoint the exact problem, and that’s exactly where a developer would also go to look.  The fourth excuse is when they say “I don’t know why it happened. Developer resolved it and I simply verified it”.  Mahesh said that as a tester it is your responsibility to ask the developer what he/she did to fix the issue.  It is not good being in a black box and being oblivious to how things work.  Finally, the fifth excuse that Mahesh talked about in the blog is that “I didn’t get the opportunity to work on anything else except for manual testing”.  He basically went on to say that testers need to find the time to do everything and work on time management.  Overall, I thought this was an okay blog.  However, was a bit aggressive, and I felt like it was saying that ALL testers say these things.  The author kind of made testers seem lazy and like they didn’t care which I don’t find to be true at all. He did apologize at the end for being “harsh” but that doesn’t make up for the fact that he was making harsh assumptions throughout the whole thing.

From the blog CS@Worcester – Alex's Comp Sci Blog by alexsblog13 and used with permission of the author. All other rights reserved by the author.

Mutation Testing (WEEK 10)

The term mutation in software testing stand for modifying the test code and can check the existing test and detect or reject the change mutes. Mutation in Java is an additional class with a single modification compared to the original code, for example it can be the change of a logical operator  in a if section :

if( a && b ) {...} => if( a || b ) {...}

When detecting or rejecting a modification by the existing test in marked as killing a mutant. If we have a perfect test code no class mutant can survive. Testing with mutant testing can be very expensive so that is one reason why is better to write a perfect code. There are tools to create mutants and run all the tests against each of the mutants automatically. The mutation creation is based on mutation operators that are which can show typical programming errors.

This picture shows a report which list all the mutant killed by ruing the mutation testing.
Here are some of the benefits when we apply the mutation testing:

Can show all new errors to the developer
Can detect hidden defects in the structure of code
Can increase customer satisfaction index because the product can be less buggy.
Maintaining and debugging the product can be easier.


Mutation testing is very useful way to find errors and fix them and it can speedup the proses of finding bugs in the code.


Citation
http://www.codeaffine.com/2015/10/05/what-the-heck-is-mutation-testing/

From the blog Table of Code by Andon S and used with permission of the author. All other rights reserved by the author.

Mutation Testing (WEEK 10)

The term mutation in software testing stand for modifying the test code and can check the existing test and detect or reject the change mutes. Mutation in Java is an additional class with a single modification compared to the original code, for example it can be the change of a logical operator  in a if section :

if( a && b ) {...} => if( a || b ) {...}

When detecting or rejecting a modification by the existing test in marked as killing a mutant. If we have a perfect test code no class mutant can survive. Testing with mutant testing can be very expensive so that is one reason why is better to write a perfect code. There are tools to create mutants and run all the tests against each of the mutants automatically. The mutation creation is based on mutation operators that are which can show typical programming errors.

This picture shows a report which list all the mutant killed by ruing the mutation testing.
Here are some of the benefits when we apply the mutation testing:

Can show all new errors to the developer
Can detect hidden defects in the structure of code
Can increase customer satisfaction index because the product can be less buggy.
Maintaining and debugging the product can be easier.


Mutation testing is very useful way to find errors and fix them and it can speedup the proses of finding bugs in the code.


Citation
http://www.codeaffine.com/2015/10/05/what-the-heck-is-mutation-testing/

From the blog Table of Code by Andon S and used with permission of the author. All other rights reserved by the author.

Mutation Testing (WEEK 10)

The term mutation in software testing stand for modifying the test code and can check the existing test and detect or reject the change mutes. Mutation in Java is an additional class with a single modification compared to the original code, for example it can be the change of a logical operator  in a if section :

if( a && b ) {...} => if( a || b ) {...}

When detecting or rejecting a modification by the existing test in marked as killing a mutant. If we have a perfect test code no class mutant can survive. Testing with mutant testing can be very expensive so that is one reason why is better to write a perfect code. There are tools to create mutants and run all the tests against each of the mutants automatically. The mutation creation is based on mutation operators that are which can show typical programming errors.

This picture shows a report which list all the mutant killed by ruing the mutation testing.
Here are some of the benefits when we apply the mutation testing:

Can show all new errors to the developer
Can detect hidden defects in the structure of code
Can increase customer satisfaction index because the product can be less buggy.
Maintaining and debugging the product can be easier.


Mutation testing is very useful way to find errors and fix them and it can speedup the proses of finding bugs in the code.


Citation
http://www.codeaffine.com/2015/10/05/what-the-heck-is-mutation-testing/

From the blog Table of Code by Andon S and used with permission of the author. All other rights reserved by the author.

Mutation Testing (WEEK 10)

The term mutation in software testing stand for modifying the test code and can check the existing test and detect or reject the change mutes. Mutation in Java is an additional class with a single modification compared to the original code, for example it can be the change of a logical operator  in a if section :

if( a && b ) {...} => if( a || b ) {...}

When detecting or rejecting a modification by the existing test in marked as killing a mutant. If we have a perfect test code no class mutant can survive. Testing with mutant testing can be very expensive so that is one reason why is better to write a perfect code. There are tools to create mutants and run all the tests against each of the mutants automatically. The mutation creation is based on mutation operators that are which can show typical programming errors.

This picture shows a report which list all the mutant killed by ruing the mutation testing.
Here are some of the benefits when we apply the mutation testing:

Can show all new errors to the developer
Can detect hidden defects in the structure of code
Can increase customer satisfaction index because the product can be less buggy.
Maintaining and debugging the product can be easier.


Mutation testing is very useful way to find errors and fix them and it can speedup the proses of finding bugs in the code.


Citation
http://www.codeaffine.com/2015/10/05/what-the-heck-is-mutation-testing/

From the blog Table of Code by Andon S and used with permission of the author. All other rights reserved by the author.

Mutation Testing (WEEK 10)

The term mutation in software testing stand for modifying the test code and can check the existing test and detect or reject the change mutes. Mutation in Java is an additional class with a single modification compared to the original code, for example it can be the change of a logical operator  in a if section :

if( a && b ) {...} => if( a || b ) {...}

When detecting or rejecting a modification by the existing test in marked as killing a mutant. If we have a perfect test code no class mutant can survive. Testing with mutant testing can be very expensive so that is one reason why is better to write a perfect code. There are tools to create mutants and run all the tests against each of the mutants automatically. The mutation creation is based on mutation operators that are which can show typical programming errors.

This picture shows a report which list all the mutant killed by ruing the mutation testing.
Here are some of the benefits when we apply the mutation testing:

Can show all new errors to the developer
Can detect hidden defects in the structure of code
Can increase customer satisfaction index because the product can be less buggy.
Maintaining and debugging the product can be easier.


Mutation testing is very useful way to find errors and fix them and it can speedup the proses of finding bugs in the code.


Citation
http://www.codeaffine.com/2015/10/05/what-the-heck-is-mutation-testing/

From the blog Table of Code by Andon S and used with permission of the author. All other rights reserved by the author.

Mutation Testing (WEEK 10)

The term mutation in software testing stand for modifying the test code and can check the existing test and detect or reject the change mutes. Mutation in Java is an additional class with a single modification compared to the original code, for example it can be the change of a logical operator  in a if section :

if( a && b ) {...} => if( a || b ) {...}

When detecting or rejecting a modification by the existing test in marked as killing a mutant. If we have a perfect test code no class mutant can survive. Testing with mutant testing can be very expensive so that is one reason why is better to write a perfect code. There are tools to create mutants and run all the tests against each of the mutants automatically. The mutation creation is based on mutation operators that are which can show typical programming errors.

This picture shows a report which list all the mutant killed by ruing the mutation testing.
Here are some of the benefits when we apply the mutation testing:

Can show all new errors to the developer
Can detect hidden defects in the structure of code
Can increase customer satisfaction index because the product can be less buggy.
Maintaining and debugging the product can be easier.


Mutation testing is very useful way to find errors and fix them and it can speedup the proses of finding bugs in the code.


Citation
http://www.codeaffine.com/2015/10/05/what-the-heck-is-mutation-testing/

From the blog Table of Code by Andon S and used with permission of the author. All other rights reserved by the author.

Mutation Testing (WEEK 10)

The term mutation in software testing stand for modifying the test code and can check the existing test and detect or reject the change mutes. Mutation in Java is an additional class with a single modification compared to the original code, for example it can be the change of a logical operator  in a if section :

if( a && b ) {...} => if( a || b ) {...}

When detecting or rejecting a modification by the existing test in marked as killing a mutant. If we have a perfect test code no class mutant can survive. Testing with mutant testing can be very expensive so that is one reason why is better to write a perfect code. There are tools to create mutants and run all the tests against each of the mutants automatically. The mutation creation is based on mutation operators that are which can show typical programming errors.

This picture shows a report which list all the mutant killed by ruing the mutation testing.
Here are some of the benefits when we apply the mutation testing:

Can show all new errors to the developer
Can detect hidden defects in the structure of code
Can increase customer satisfaction index because the product can be less buggy.
Maintaining and debugging the product can be easier.


Mutation testing is very useful way to find errors and fix them and it can speedup the proses of finding bugs in the code.


Citation
http://www.codeaffine.com/2015/10/05/what-the-heck-is-mutation-testing/

From the blog Table of Code by Andon S and used with permission of the author. All other rights reserved by the author.

Mutation Testing (WEEK 10)

The term mutation in software testing stand for modifying the test code and can check the existing test and detect or reject the change mutes. Mutation in Java is an additional class with a single modification compared to the original code, for example it can be the change of a logical operator  in a if section :

if( a && b ) {...} => if( a || b ) {...}

When detecting or rejecting a modification by the existing test in marked as killing a mutant. If we have a perfect test code no class mutant can survive. Testing with mutant testing can be very expensive so that is one reason why is better to write a perfect code. There are tools to create mutants and run all the tests against each of the mutants automatically. The mutation creation is based on mutation operators that are which can show typical programming errors.

This picture shows a report which list all the mutant killed by ruing the mutation testing.
Here are some of the benefits when we apply the mutation testing:

Can show all new errors to the developer
Can detect hidden defects in the structure of code
Can increase customer satisfaction index because the product can be less buggy.
Maintaining and debugging the product can be easier.


Mutation testing is very useful way to find errors and fix them and it can speedup the proses of finding bugs in the code.


Citation
http://www.codeaffine.com/2015/10/05/what-the-heck-is-mutation-testing/

From the blog Table of Code by Andon S and used with permission of the author. All other rights reserved by the author.